User Manual

Chapter 4 - Operation and Administration of the Micro BTS Equipment Menu
4Motion 736 System Manual
4.8.1.1.8 Health
Read-only. The health status of the AU card.
4.8.1.1.9 AU MAC Address
Read-only. The primary MAC address of the AU card.
4.8.1.1.10 AU MAC Address Secondary
Read-only. The secondary MAC address of the AU card.
4.8.1.2 Control
The AU Control menu includes the following parameter:
4.8.1.2.1 Shutdown Power Port 1
This parameter can be used to shutdown power to port 1 of the radio. The default
status is normal operation (no shutdown).
4.8.1.2.2 Shutdown Power Port 2
This parameter can be used to shutdown power to port 2 of the radio. The default
status is normal operation (no shutdown).
4.8.1.2.3 Last Reset Reason
Read-only. The reason for the last reset of the AU. Possible reasons include
Unknown, Health Monitoring Failed, User Initiated. Configuration Failure,
Internal Errors.
4.8.2 Radio
The Radio menu includes the following options for each of the two radios (1 and
2):
 “General”
 “Port”
4.8.2.1 General
The Radio General menu enables viewing the general radio properties and status
and viewing/updating some general parameters.
4.8.2.1.1 Required Radio Type
The required radio type is set automatically to the value of the actual (installed)
radio type.
Radio Type is in the format oDUAAAABBBBZZZWPPRbyTCOu, where: