User Manual

Chapter 4 - Operation and Administration of the Micro BTS BS Menu
4Motion 728 System Manual
4.7.2.7.3.1.2802.1p Priority
802.1p priority value to be used for marking of intra-ASN (R8/R6) traffic. The
range is 0-7. The default is 0.
4.7.2.7.3.2 Internal Management Traffic QOS Rules
The Internal Management Traffic QOS Rules menu enables viewing/updating the
values configured for the following parameters:
 “Diffserv Code Point”
 “802.1p Priority”
4.7.2.7.3.2.1Diffserv Code Point
DSCP priority value to be used for marking of internal management traffic. The
range is 0-63. The default is 0.
4.7.2.7.3.2.2802.1p Priority
802.1p priority value to be used for marking of internal management traffic. The
range is 0-7. The default is 0.
4.7.2.7.3.3 QOS Rules
The QOS Rules menu includes the following options:
 Show: Use the Show option to view the main parameters (Rule Status, Marking
Rule Name, Service Flow Data Delivery Type, Service Flow Traffic Priority) of
each of the existing QoS Rules.
 Add: Use the Add option to add a new QoS Rule.
 Select: Use the Select option to select a specific QoS Rule. You can than select
one of the following:
» Use the Show option to view all parameters of the selected rule.
» Use the Update option to update one or several parameters of the selected
rule.
» Use the Delete option to remove the selected rule from the database.
The QOS Rule parameters are:
4.7.2.7.3.3.1Rule Number
The index number of the rule. A number in the range 1-16383.