User Manual
Chapter 4 - Operation and Administration of the Micro BTS BS Menu
4Motion 726 System Manual
“IP Address”
“IP Subnet Mask”
“Default Gateway”
“Vlan ID”
“Default Gateway Connectivity Status”
4.7.2.7.1.1 IP Address
The IP address of the bearer interface of the BS. Must be unique in the network.
Should be in the same subnet, together with the unit’s bearer interface.
4.7.2.7.1.2 IP Subnet Mask
The IP subnet mask of the bearer interface of the BS.
4.7.2.7.1.3 Default Gateway
The IP address of the default gateway of the bearer interface of the BS. Must be in
the same subnet with the BS bearer IP Address.
4.7.2.7.1.4 Vlan ID
The VLAN ID of the bearer interface of the BS. The range is 11-100, 110-4094.
4.7.2.7.1.5 Default Gateway Connectivity Status
Read-only. The status of connectivity with the default authenticator: Unknown,
Up, down. The keep-alive mechanism starts only after first registration at the
ASN-GW. Until then this mechanism is disable and connectivity status is
Unknown.
4.7.2.7.2 Authentication
The Authentication menu enables viewing/updating the values configured for the
following parameters:
“Default Authenticator IP Address”
“Thresholds - Suspended EAP Process”
“Threshold - Active MSs”
“Threshold - Maximum EAP Rounds”
4.7.2.7.2.1 Default Authenticator IP Address
The IP address of the default authenticator ASN GW.