User Manual

Chapter 4 - Operation and Administration of the Micro BTS BS Menu
4Motion 720 System Manual
used only if all MSs served by the BS support RCID. When enabled, CIDs of either
7 or 11 bits will be dynamically used, according to the current number of MS
served at each given moment.
The RCID Usage defines whether RCID is enabled or disabled. The default is
Disable.
4.7.2.3 Mobility
The Mobility menu enables viewing/updating the values configured for the
following parameter:
4.7.2.3.1 Deployment
The type of deployment in the area served by the BS: Fix or Mobile. To support
proper handover, should be set to Fix only if mobile MSs are not expected. The
default is Fix.
4.7.2.4 Power Control
The Power Control menu enables viewing/updating the values configured for the
following parameters:
 “Target Ni”
 “Required C/N Levels - ACK”
 “Required C/N Levels - CQI”
 “Required C/N Levels - CDMA”
 “Required C/N Levels - QPSK 1/2”
 “Required C/N Levels - QPSK 3/4”
 “Required C/N Levels -16-QAM 1/2”
 “Required C/N Levels - 16-QAM 3/4”
 “Required C/N Levels - 64-QAM 1/2”
 “Required C/N Levels - 64-QAM 2/3”
 “Required C/N Levels -64-QAM 3/4”