User Manual

Chapter 3 - Operation and Administration of the Macro BTS Managing BSs
4Motion 564 System Manual
Command
Syntax
npu(config-bs-66053-airframe)# general [cell-id <(0 to 31 StepSize
1)> ] [preamble-grp <(1 to 2 StepSize 1)>] [segment <(0 to 2
StepSize 1)> ] [frame-offset <zero|random)> ] [ul-duration <(3 to
7 StepSize 1 | 10 to 10 StepSize1)> ] [nbr-beam-forming {yes | no}
]
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible Values
[cell-id <(0 to 31
StepSize 1)> ]
The Cell ID (IDCell) used
for preamble selection.
Mandatory
when
creating a
new BS.
N/A 0 - 31
[preamble-grp <(1
to 2 StepSize 1)>]
The preamble group. A
value of 2 is available only
for the following
combinations of segment
and cell-id values:
segment=0, cell-id=0, 3, 6,
9, 12, 15.
segment=1, cell-id=1, 4, 7,
10, 13, 16.
segment=2, cell-id=2, 5, 8,
11, 14, 17.
Optional 1 1 - 2
[segment <(0 to 2
StepSize 1)> ]
The segment (BS) number
in a three sector BS (0-2).
This number influences
the preamble selection
and the major group used
for the FDC transmission.
Mandatory
when
creating a
new BS.
N/A 0 - 2
[frame-offset
<zero|random> ]
Controls the offset applied
between the internal frame
count and the reported
frame number.
If random is selected, the
AU will choose a random
number between 0 to 15.
Mandatory
when
creating a
new BS.
zero
 zero (0)
 random