User Manual

Chapter 4 - Operation and Administration of the Micro BTS BS Menu
4Motion 713 System Manual
During IM, MS performs location updates when moving from one PG to another.
While in the same PG, MS does not need to transmit in the UL and can be paged
in the DL if there is traffic targeted at it.
The range of the Paging Group ID parameter is from 0 to 65535. 0 means that Idle
Mode is not enabled. If Idle Mode is enabled (Paging Group ID is not 0), must be
unique in the network (different Paging Group ID for each BS).
4.7.2.2 Air Frame Structure Zones
The Air Frame Structure Zones menu includes the following options:
 “Uplink Data Zone”
 “Downlink Data Zone”
 “First Zone”
 “Uplink Feedback Zone”
 “Frame Structure Mode”
4.7.2.2.1 Uplink Data Zone
The Uplink Data Zone menu enables viewing/updating the values configured for
the following parameters:
 “Uplink Basic Rate”
 “UL Permutation Base”
4.7.2.2.1.1 Uplink Basic Rate
The uplink basic rate:
 ctcQpskOneOverTwoTimesSix (QPSK 1/2 Repetition 6)
 ctcQpskOneOverTwoTimesFour (QPSK 1/2 Repetition 4)
 ctcQpskOneOverTwoTimesTwo (QPSK 1/2 Repetition 2)
 ctcQpskOneOverTwo (QPSK 1/2)
 ctcQpskThreeOverFour (QPSK 3/4)