User Manual

Chapter 4 - Operation and Administration of the Micro BTS BS Menu
4Motion 710 System Manual
4.7.1.10 DL Permutation Base
The permutation base used in the downlink data zone.
The valid range is from 0 to 31.
4.7.1.11 Permutation Base
The permutation base used in the uplink feedback zone.
The valid range is from 0 to 69.
4.7.1.12 UL Permutation Base
The permutation base used in the uplink data zone.
The valid range is from 0 to 69.
4.7.1.13 IP Address
The IP address of the bearer interface of the BS. Must be unique in the network.
Must be in the same subnet with the unit’s bearer interface.
4.7.1.14 IP Subnet Mask
The IP subnet mask of the bearer interface of the BS.
4.7.1.15 Default Gateway
The IP address of the default gateway of the bearer interface of the BS. Must be in
the same subnet with the BS bearer IP Address.
4.7.1.16 Vlan ID
The VLAN ID of the bearer interface of the BS.
The range is 11-100, 110-4094. The default is 11.
4.7.1.17 Default Authenticator IP Address
The IP address of the default authenticator ASN GW.
4.7.1.18 Paging Group ID
The Paging Group ID of the BS.
The range is from 0 to 65535. 0 means that Idle Mode is not enabled. If Idle Mode
is enabled (Paging Group ID is not 0), must be unique in the network (different
Paging Group ID for each BS).