User Manual

Chapter 4 - Operation and Administration of the Micro BTS BTS Menu
4Motion 702 System Manual
 reset: Select this option to reset the BTS. To avoid unintentional reset, you will
be prompted to confirm the reset request. Changes to some of the configurable
parameters are applied only after reset.
 resettoFactoryDefault: Select this option to restore the factory default
configuration of all BTS parameters. All parameters will revert to their default
values after the next reset. To avoid unintentional action, you will be prompted
to confirm the request.
 noAction: Select this option to exit the Shutdown Operation submenu without
any action.
 resettoFactoryDefaultwithConnectivity: Select this option to restore factory
default configuration without changing any of the parameters required for
maintaining management connectivity to the unit. To avoid unintentional
action, you will be prompted to confirm the request.
The parameters that are maintained without any change include:
» BTS Name
» Management interfaces parameters
» L1 & L2 parameters
» SNMP Traps Managers configurations
» Authorized Managers configurations
4.5.4 Management
The Management menu includes the following options:
IMPORTANT
Before shutting down the system, it is recommended that you save the configuration file. The last
saved configuration is used for rebooting the system.
After shutting down the system you cannot restart it from remote. To start up the unit (after shut
down), switch off and then switch on the power supply,
IMPORTANT
Reset to default configuration will affect the ability for remote management of the unit.