User Manual

Chapter 4 - Operation and Administration of the Micro BTS BTS Menu
4Motion 699 System Manual
4.5.3.3.2.3 Load to Shadow
The Load to Shadow option enables initiating a process of loading a new SW file to
the BTS. The loaded SW file will be stored as the new Shadow file.
 The IP address of the TFTP Server holding the SW file to be loaded is defined by
the TFTP Server parameter (see “TFTP Server” on page 699) You will be
prompted to enter the File Path And File Name (up to 80 characters)
4.5.3.3.2.4 Reset and Run from Shadow
Select the Reset and Run from Shadow option to reset the BTS and run the
Shadow version after power up. To avoid unintentional actions you will be
prompted to confirm the request.
4.5.3.3.2.5 Set Running Version as Operational
When the BTS is running the Shadow version (after selecting Reset and Run from
Shadow), it will boot from the Operational version after the next reset. Select the
Set as Operational option if you want to swap versions so that the running version
will become the Operational version and will be the version to be used after reset.
To avoid unintentional actions you will be prompted to confirm the request.
4.5.3.4 TFTP Server
The TFTP Server option enables viewing or updating the IP address of the TFTP
server to be used for SW download.
4.5.3.5 Files Control
The Files Control submenu enables creating backup files of the BTS configuration
and downloading a configuration file to the BTS.
The Files Control menu includes the following menu options:
 “Restore”
 “Backup”
 “Backup Files”
4.5.3.5.1 Restore
The Restore submenu enables restoring a previously saved backup configuration.
The Restore submenu includes the following options:
4.5.3.5.1.1 Restore From External File
The Restore From External File submenu includes the following options: