User Manual

Chapter 4 - Operation and Administration of the Micro BTS BTS Menu
4Motion 695 System Manual
4.5.2.1.3 IP Subnet mask
The Subnet Mask of the Management interface.
The default is 255.255.255.0.
4.5.2.1.4 802.1P Priority
The 802.1P (VLAN) Priority of management traffic.
The range is 0-7.
The default is 0.
4.5.2.1.5 DSCP
The DSCP value of management traffic.
The range is 0-63.
The default is 0.
4.5.2.1.6 Next Hop Gateway
The Default Gateway IP address of the Management interface.
The default is 0.0.0.0 (must be changed to a valid value).
The Default Gateway must be in the subnet of the IP Address.
4.5.2.2 ASN-GW Load Balancing Pools
The Load Balancing feature provides a WiMAX operator with the capability to
build resilient ASN infrastructure using ASN-GW redundancy. Every BS is
provisioned with two lists of redundant ASN-GWs (pools). The BS applies
round-robin mechanism in order to pick an Authenticator for each MS that
performs initial network entry. This should eventually distribute the load between
Anchor ASN-GWs. Geographical site backup can be achieved by using different
priority of ASN-GW pools (Authenticator "metric").
At the unit (BTS) level, up to two pools (with different priorities), each with up to
10 ASN-GWs, can be defined. Each BS defined in the unit will “inherit” these
pools.
The ASN-GW Load Balancing Pools submenu includes two options: Primary Pool
and Secondary Pool. Select the Primary or Secondary Pool option to view or
update the pool’s content. The options available for each pool are:
 Show: Select this option to view the current content of the pool.
 Add: Select this option to add an address to the pool (up to a maximum of 10
addresses per pool). You will be prompted to define the index for the entry (a