User Manual

Chapter 3 - Operation and Administration of the Macro BTS Troubleshooting
4Motion 677 System Manual
For example, run the following command if you want to disable tracing for WiMAX
signaling protocols:
npu(config)# no trace level SIGASN
3.12.1.2.3 Displaying Trace Levels
To view the trace levels configured for one or more modules, run the following
command:
npu(config)# show trace level
[{StartupMgr|SWDownload|FaultMgr|PerfMgr|ShelfMgr|SIGASN|UserIF|AU
Mgr}]
Command
Syntax
npu(config)# no trace level
[{StartupMgr|SWDownload|FaultMgr|PerfMgr|ShelfMgr|SIGASN|UserIF|AUMgr}]
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[{StartupMgr|S
WDownload|Faul
tMgr|PerfMgr|S
helfMgr|SIGASN
|UserIF|AUMgr}
]
Indicates the name of the
module for which tracing is to
be disabled. If you do not
specify any value for this
parameter, tracing is disabled
for all functionalities. For
more information about these
parameters, refer
Table 3-33.
Optional N/A
 StartupMgr
 SWDownloa
d
 FaultMgr
 PerfMgr
 ShelfMgr
 SIGASN
 UserIF
 AUMgr\
Command
Modes
Global configuration mode