User Manual

Chapter 3 - Operation and Administration of the Macro BTS Monitoring HW and SW Components
4Motion 668 System Manual
npu# show saved {Performance | Active-alarm | Log | User-history}
files [recent <1-65535>]
For example, if you want to view the 30 most recently saved log files, residing in
the TFTP boot directory of the NPU, run the following command:
npu# show saved Log files recent 30
To display a list of collected system logs files, run the following command:
npu# show saved system logs
Command
Syntax
npu# show saved {Performance | Active-alarm | Log | User-history}
files [recent <1-65535>]
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
Performance|
Active-alarm
|Log|User-hi
story
Indicates the type of system
files that are to be displayed:
Mandatory N/A
 Performance
 Active-alarm
 Log
 User-history
[recent
<1-65535>]
Indicates the number of files
to be displayed. The most
recently saved files are
displayed.
If you do not specify a value
for this parameter, all the files
of a particular type are
displayed.
Optional N/A 1-65355
Command
Modes
Global command mode
Command
Syntax
npu# show saved system logs