User Manual

Chapter 3 - Operation and Administration of the Macro BTS Monitoring HW and SW Components
4Motion 667 System Manual
3.11.2 Displaying System Files
The following system files reside in the TFTP boot directory of the NPU:
 Performance data files: Contain performance counters for system modules.
(For more information about the modules for which you can configure
collection and storage of performance data, refer to Section 3.4.14. These files
are available in the path, /tftpboot/management/performance.
 System log: Contain log and trace messages. (For more information about
configuring logging and tracing, refer to Section 3.12.1 and Section 3.4.13.
These files are available in the path, /tftpboot/management/system_logs/.
 User history files: Contain information about the commands/tasks executed
by the user. These files are available in the path,
/tftpboot/management/user_log.
In addition, Collected System Logs files with complete status and configuration
details may also be available (for details refer to “Creating a Collected System Logs
File” on page 396).
To display a list of performance data, system log, active alarms, or user history
files, run the following command:
Display
Format
RATELIMIT COUNTERS: Pre-defined applications
--------------------------------------------
Application Packets discarded
<Application> <Number of Packets Discarded>
<Application> <Number of Packets Discarded> SSH
<Application> <Number of Packets Discarded> SNMP
RATELIMIT COUNTERS: User-defined applications
---------------------------------------------
Application Packets discarded
<Application> <Number of Packets Discarded>
Command
Modes
Global command mode