User Manual

Chapter 3 - Operation and Administration of the Macro BTS Monitoring HW and SW Components

4Motion 665 System Manual

3.11.1.5 Displaying Packets Discarded Via Rate Limiting

To retrieve the number of packets discarded because of rate limiting for a specific

or all applications (pre-defined, user-defined or all), run the following command:

npu# show rate-limit counters {ftp | telnet | tftp | ssh | icmp |

snmp | R4-R6 | igmp | eap | arp | all-others | <user-defined-app> |

all}

NOTE

For more information about configuring rate limiting, refer to “Rate Limiting for the NPU” on

page 174

Command

Syntax

npu# show rate-limit counters {ftp | telnet | tftp | ssh | icmp | snmp | R4-R6 | igmp | eap | arp |

all-others | <user-defined-app> | all}

Privilege

Level