User Manual

Chapter 3 - Operation and Administration of the Macro BTS Monitoring HW and SW Components
4Motion 660 System Manual
3.11 Monitoring HW and SW Components
This section describes the procedures for:
 “Monitoring Hardware Components” on page 660
 “Displaying System Files” on page 667
3.11.1 Monitoring Hardware Components
You can use the CLI to monitor performance of the following hardware
components with respect to:
 “Displaying the Card Types Installed in Shelf Slots 1 - 9” on page 660
 “Displaying the Current Status of Shelf Components” on page 661
 “Displaying the Temperature of the Shelf” on page 663
 “Displaying Utilization of CPU and Memory Resources for the NPU” on
page 664
 “Displaying Packets Discarded Via Rate Limiting” on page 665
3.11.1.1 Displaying the Card Types Installed in Shelf Slots 1 - 9
To view the types of cards that are currently installed in slots 1-9 of the shelf run
the following command:
npu# show shelf-view
Command
Syntax
npu# show shelf-view
Privilege
Level
1