User Manual

Chapter 3 - Operation and Administration of the Macro BTS Managing Sectors
4Motion 653 System Manual
 Sector Reserved (refer to Section 3.10.1.6.2)
3.10.1.6.1 Displaying Configuration Information for Sector Definition Parameters
To display configuration information for the Sector Definition parameters of a
specific or all Sector objects, run the following command:
npu# show sector-definition [sector-id <(1 to 6 StepSize 1)>]
Specify the Sector ID (1-6) if you want to display configuration information for a
particular Sector. Do not specify a value for this parameter if you want to view
configuration information for all existing Sector objects.
Command
Syntax
npu# show sector-definition [sector-id <(1 to 6 StepSize 1)> ]
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
sector-id <(1 to 6
StepSize 1)>
The Sector ID
Specify a value for this
parameter if you want to
display the Sector Definition
parameters of a specific
Sector. Do not specify a value
for this parameter if you want
to display the parameters of
all Sectors.
Optional N/A 1-6
Display
Format
(for each
existing
ODU object
if requested
for all
ODUs)
SectorID :<value>
SectorName :<value>
SectorHeading(degrees) :<value>
SectorWidth(degrees) :<value>