User Manual

Document History
4Motion xxix System Manual
Displaying Configuration Information
for Airframe Uplink Data Zone
Parameters
Section 3.9.12.5.6
Removed subchannels-number and
startallocation.
February 2010
Managing BS Feedback Allocation
Parameter
Section 3.9.5
Removed max-cqi (changed to vendor
parameter)
February 2010
Managing BS Bearer Interface
Parameters
Section 3.9.13
Removed linkusage-hardthrshld and mtu
(changed to vendor parameters).
Added ASNGWStatus (read-only).
February 2010
Managing BS General Parameters
Section 3.9.3
Added dl-def-rate-for data.
Changed dl-def-rate to
dl-def-for-management and updated default
value.
Added deployment
February 2010
Configuring Alarm Threshold
Parameters
Section 3.9.20.1
Updated descriptions and defaults of
ul-mednoise and ul-99prcntnoise.
February 2010
Configuring Power Control
Parameters
Section 3.9.4.2
Changed pusc to target-ni. Updated step size
to 1. Removed cqi-ack-ranging.
February 2010
Managing Handover Negotiation at
TBS Parameters
Removed. defaultactiontime is obsolete
(calculated automatically), fastrangingalloc
changed to vendor parameter)
February 2010
Configuring AU Parameters
Section 3.6.2
Added support for AU type au2x2 (2-ports
AU).
February 2010
Managing the BS Idle Mode
Parameters
Section 3.9.23
Removed idle-Mode-ms-initiated-for-ugs
(changed to vendor parameter)
February 2010
Managing Software Upgrade
Section 3.2
Moved to Operation Chapter (was previously
an Appendix)
February 2010
Managing AAA Client Configuration
Section 3.4.12.9.1
Added support for AAA server redundancy.
src-intf can be configured to either the bearer
or external-management IP interface.
February 2010
Configuring the DHCP Relay Option
82 Parameters
Section 3.4.12.10.4.4.2
Added new option to Subopt1value and
Subopt2value
February 2010
Topic Description Date Issued