User Manual

Table Of Contents
Document History
4Motion ii System Manual
Document History
Topic Description Date Issued
First Release for GA July 2008
Rate Limiting for the NPU
Section 3.4.7.2
Rate limits are configurable only by the
vendor.
May 2009
Configuring ACLs
Section 3.4.10
Updated default ACLs. May 2009
Configuring Performance Data
Collection
Section 3.4.14
Added support for new counters groups,
updated names.
May 2009
Configuring the Power Control
Required C/N Level Parameters
Section 3.9.4.2.2
Updated Defaults for cqi, cdma, qam64-1by2,
qam64-2by3, qam64-3by4, qam64-5by6.
May 2009
Managing the BS Keep-Alive
Functionality
Section 3.9.22
Updated commands’ syntax. May 2009
Managing the BS Idle Mode
Parameters
Section 3.9.23
New feature May 2009
Managing BS Services Added new parameters: paging-cycle,
paging-offset, lm-traffic-idle-period,
dl-def-rate.
Updated range and default value for
max-subburst.
May 2009
Managing Ranging Parameters
Section 3.9.19
The following tables were removed from
operator CLI: Bandwidth Request, Handover
Ranging, Initial Ranging, Periodic Ranging,
Timing Correction.
contbased-rsrvtimeout was removed from
Ranging General table.
May 2009
Airframe General Parameters
Sections
3.9.12.2.1,
3.9.12.3.1, 3.9.12.5.1
Updated parameters:
Removed: enable-ul-scrotation.
Added: auto-diversity, auto-rx-enable.
Corrected name: ul-duration.
May 2009
Airframe Cyclic Delay Parameters
Section 3.9.12.2.4
Updated descriptions. May 2009
Airframe Linear Delay Parameters
Previously Section 4.8.16.2.5
Updated descriptions. May 2009