User Manual

Document History
4Motion xv System Manual
Configuring the Date and Time
Section 3.4.16.2.3
Corrected the presence of UTC to Optional. June 2009
Configuring Power Feeders
Section 3.4.16.3.1
Added note on error condition. June 2009
Displaying the Unique Identifier for
the 4Motion Shelf
Section 3.4.16.8.2
Corrected command’s syntax. June 2009
Displaying the Vendor Identifier
Section 3.4.16.9
Updated description. June 2009
Displaying Location Information for
the 4Motion Shelf
This section (previously Section 4.10.1.4) was
removed (described in
Section 3.4.16.7.2).
June 2009
Displaying the Unique Identifier for
the 4Motion Shelf
This section (previously Section 4.10.1.5) was
removed (described in
Section 3.4.16.8.2).
June 2009
Enabling the Port Monitoring Session
Section 3.12.2.1
Updated command’s syntax. June 2009
Disabling a Port Monitoring Session
Section 3.12.2.1
Updated command’s syntax.
Updated description
June 2009
Upgrading the NPU: Step 2:
Triggering Software Download
Added error condition (available memory). June 2009
Upgrading the AU Step 3: Creating
the AU-to-Image Mapping
Removed error condition (regarding mapping
the AU to an image that is not residing in the
AU flash).
June 2009
Displaying the Card Types Installed in
Shelf Slots 1 - 9
Section 3.11.1.1
New June 2009
ODU Names
Table 1-6,
ODU-2340-2400-000N-36-1X1-N changed to
ODU-HP-2.3b
June 2009
Configuring Bearer Plane QoS
Marking Rules
Section 3.4.12.7
Updated description of the feature. June 2009
Deleting Source Addresses
Section 3.4.12.11.4.5.5
Updated command syntax. June 2009
Deleting Destination Addresses
Section 3.4.12.11.4.6.5
Updated command syntax. June 2009
Topic Description Date Issued