User Manual

Chapter 3 - Operation and Administration of the Macro BTS Using the Command Line Interface
4Motion 84 System Manual
 “Deleting a User” on page 85
3.1.6.1.1 Adding/Modifying Users
To add/modify a user, and assign a username, password, and privilege level, run
the following command:
npu(config)# username <user-name> password <passwd> privilege
<1-10>
IMPORTANT
Only users who have logged in as admin can execute this task.
IMPORTANT
An error may occur if:
 You are not logged in as the admin.
 The username or password that you have specified is more than 20 characters.
 The privilege level that you have specified is not within the range, 1-10.
Command
Syntax
npu(config)# username <user-name> password <passwd> privilege <1-10>
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
username
<user-name>
Indicates the user name of
the user to be added.
Mandatory N/A String (up to 20
characters and
case-sensitive)
password
<passwd>
Indicates the password to be
assigned to the user to be
added.
Optional passwor
d
String (up to 20
characters and
case-sensitive)