User Manual

Chapter 3 - Operation and Administration of the Macro BTS Using the Command Line Interface
4Motion 83 System Manual
3.1.6 Managing Users and Privileges
To enable multi-level access to the CLI, you can create and manage multiple
users, and assign privilege levels for each user. The privilege level determines
whether a user is authorized to execute a particular command. The privilege level
is pre-configured for each command, and can be between 1 and 10, where 1 is the
lowest and 10 is the highest. The user can execute all commands for which the
privilege level is equal to or lower than the default privilege level assigned to the
user.
You can also configure passwords for each privilege level. Users with lower
privilege levels can enter this password to enable higher privilege levels.
This section describes the commands for:
 “Managing Users” on page 83
 “Managing Privileges” on page 86
 “Enabling/Disabling Higher Privilege Levels” on page 88
 “Displaying Active Users” on page 90
 “Displaying All Users” on page 91
 “Displaying the Privilege Level” on page 91
3.1.6.1 Managing Users
You can add/modify/delete one or more users for accessing the CLI either
through a local or remote terminal.
This section describes the commands for:
 “Adding/Modifying Users” on page 84
IMPORTANT
By default, the privilege level of users logging in with admin privileges is 10. However, the admin
user can execute some additional commands for adding users and enabling passwords for different
privilege levels.
IMPORTANT
Only users who have logged in as admin can add/modify/delete users.