User's Manual

Basic Installation
BreezeACCESS MMDS Series 9 BS Equipment Installation Manual
2.6 Installing the Modular Shelf Indoor Equipment
2.6.1 BS-SH Slot Assignments
The Base Station shelf has ten slots, as shown in Figure 2-4
BS-AU
MON
IF
ETH
5(6(7
2))
21
3:5
$/50
:/1.
0$67(5
BS-AU
MON
IF
ETH
5(6(7
2))
21
3:5
$/50
:/1.
0$67(5
BS-AU
MON
IF
ETH
5(6(7
2))
21
3:5
$/50
:/1.
0$67(5
BS-AU
MON
IF
ETH
5(6(7
2))
21
3:5
$/50
:/1.
0$67(5
BS-AU
MON
IF
ETH
5(6(7
2))
21
3:5
$/50
:/1.
0$67(5
BS-AU
MON
IF
ETH
5(6(7
2))
21
3:5
$/50
:/1.
0$67(5
Figure 2-4. Shelf Slot Assignments
The two wide slots on the both sides of the shelf accommodate the BS-PS power
supply modules. The shelf is designed to support power supply redundancy
through the use of two Power Supply modules. If a single power supply is used,
it can be inserted in any of the two available slots.
The remaining eight slots can accommodate up to six active BS-AU modules.
Two extra slots are for future use. Active BS-AU modules can be installed in any
of the 8 slots. Unused slots should be covered by blank panels.
8 Middle slots - BS-AU modules
Extreme slots - Power Supply modules