User's Manual

Basic Installation

BreezeACCESS MMDS Series 3 BS Equipment Installation Manual

2.2 Packing List – Stand-alone AU-A/E-NI Access Unit

• AU-NI indoor unit

• Outdoor unit:

⇒ AU-RA with integral antenna

⇒ AU-RE with a connector to an external antenna (not included)

• AU-PS power supply with a mains power cord

• Pole mounting kit for the Outdoor unit (with two brackets, four sets of

screws, nuts and washers)

• Wall mounting kit for the AU-NI unit

2.3 Other Items Required for Installation

• IF cable (s)* (one for each AU)

• Grounding cable(s) with an appropriate termination (one for each AU)

• Ethernet cable(s) (straight, one for each AU)

• Antenna(s)* and RF cable(s)* (AU-E-NI or AU-E-BS only)

• A portable PC with terminal emulation software

• Installation tools and materials.

Items marked with an asterisk (*) are available as options from BreezeCOM.

2.4 Guidelines for Selection of Equipment Location

Select appropriate locations for the equipment using the following guidelines:

• The outdoor unit can be pole—or wall mounted. Its location should allow

easy access to the unit for installation and testing.

• The AU-RA unit with its integrated antenna, or the external antenna

connected to the AU-RE unit, should be installed where it provides coverage

of all subscriber units in the area it is intended to serve. The higher the AU-

RA or the antenna, the better coverage it can provide.