User's Manual

Verifying correct operation
BS Equipment Installation Manual 24 BreezeACCESS MMDS Series
Name Description Functionality
Yellow LED On - Power On
Off – Power is not received from the Indoor
unit
8 Green LEDs RSSI in 4 dB resolution starting at –91dBm
Red LED Received signal strength is –40dBm or higher
4.3 Verifying Correct Operation of the Outdoor Unit
To verify proper operation, view the LED indicators located on the bottom panel
of the Outdoor unit as shown in Figure 4-1.
ETH
ALARM
IF
ANT
12V IN
Figure 4-1. AU-RE Radio Unit Bottom Panel
Note: The bottom panel of the AU-RA unit is identical to the bottom panel of the
AU-RE shown above, except that it does not have an ANT connector.