User's Manual

Basic Installation
BS Equipment Installation Manual 6 BreezeACCESS MMDS Series
2.5 Installing the Outdoor Radio Unit
2.5.1 Mounting the Outdoor Unit
The outdoor unit can be secured to the pole using one of the following options:
• Special brackets (supplied with each unit). There are two pairs of screw
holes, allowing use of the special brackets with various pole widths.
• U-bolts - size A (inner installation holes, up to 2" pole).
• U-bolt - size B (outside installation holes, up to 3" pole).
• Metal bands (9/16” wide, minimum 12” long).
Figure 2-1 shows the locations of the holes, grooves and screw holes on the rear
side of the unit.
Figure 2-2 illustrates the method of installing an AU-RA unit on a pole using the
supplied brackets.
Figure 2-3 illustrates the method of installing an AU-RE unit on a pole using the
supplied brackets.
Note: Make sure to install the unit with the bottom panel (the panel with the
connectors) facing downward.