User's Manual

Verifying Correct Operation
SU A/E Subscriber Units Installation Manual 22 BreezeACCESS MMDS Series
7. VERIFYING CORRECT OPERATION
7.1 General
After completing the installation as described above, the system starts operation.
To verify correct operation, view the LED indicators located on the front panel of
the SU-NI Indoor unit as shown in Figure 2-7 on page 11.
Table 4 lists the various LED states.
Table 4: SU-NI LEDs
Name Description Functionality
PWR Power supply On – After successful power up
Off – Power off
WLNK Wireless link
activity
Blinking –Receiving packet from the wireless link
Off – No reception of packets from the wireless
link
ETH
connector
embedded
yellow
LED
Ethernet
activity
On- Receive/Transmit on Ethernet port
Off- No Receive/Transmit on Ethernet port
ETH
connector
embedded
green LED
ETH Link
Integrity
On- Unit is connected to Ethernet segment
Off- Unit is not connected to Ethernet segment
7.2 Verifying Data Connectivity
From the user’s PC or from a portable PC connected to the unit, Ping the unit or
try to connect it to the Internet.