User's Manual

Configuring System Parameters
BreezeACCESS MMDS Series 15 SU A/E Subscriber Units Installation Manual
1. From the main menu, type 3 to access the Basic Configuration menu.
BreezeACCESS (SU-1D)
Official Release Version – 2.1.1
Release Date: Tue Mar 07 11:21:22 2000
Basic Configuration
====================
1 – IP Address
2 – Subnet Mask
3 – Default Gateway Address
4 – ESSID
5 – Maximum Data Rate
6 – Frequency Offset
7 – Hopping Band
X - Transmit Power Control
Y - Receive Attenuation Control
S - Show Basic Configuration
BreezeACCESS >>>
Figure 3-2. Basic Configuration Menu
2. From the Basic Configuration menu, type 1 to access the IP Address
selection screen. Enter the required IP address.
3. Type 2 to access the Subnet Mask selection screen. Enter the required subnet
mask.
4. Type 3 to access the Default Gateway Address selection screen. Enter the
required default gateway address.
5. Type 4 to access the ESSID selection screen. Enter the required ESSID.
6. Type 6 to access the Frequency Offset selection screen. Enter the required
offset.
7. Type H to access the Hopping Band selection screen. Enter the required
bandwidth.