User's Manual

BASIC Installation
BreezeACCESS MMDS Series 7 SU A/E Subscriber Units Installation Manual
2.5 Installing the Outdoor Unit
2.5.1 Pole Mounting the Outdoor Unit
The Outdoor unit can be secured to the pole using one of the following options:
• Special brackets (supplied with each unit). There are two pairs of screw
holes, allowing use of the special brackets with various pole widths.
• U-bolts – size A (inner installation holes, up to 2” pole).
• U-bolt – size B (outside installation holes, up to 3” pole).
• Metal bands (9/16” wide, minimum 12” long).
Figure 2-3 shows the locations of the holes, grooves and screw holes on the rear
side of the Outdoor unit.
Figure 2-4 illustrates the method of installing an SU-RA Outdoor unit on a pole,
using the brackets.
Figure 2-5 illustrates the method of installing an SU-RE Outdoor unit on a pole,
using the brackets.
Note: Make sure to install the unit with the bottom panel (the panel with the IF
connector) facing downward.