User's Manual
Table Of Contents
- System Description
- Introducing BreezeACCESS 900
- Cell Extender
- Subscriber Unit
- BreezeCONFIG( ACCESS
- Specifications
- Installing the Cell Extender
- Installing the SU-I Subscriber Unit
- Set-up and Initialization
- Aligning the Cell Extender’s SU-RA Antenna
- Aligning the SU-I Subscriber Unit’s Antenna
- Verifying Proper Operation
- Flexible Hopping Definition Mode
Appendix D - Configuring Hopping Frequencies and Operational Sequences
Flexible Hopping Definition Mode
General
The process of setting the hopping sequence using the Flexible Hopping
Definition mode includes the following steps:
1. Select the frequencies to be used using the Flexible Hopping
Definition menu
2. Define the method of generating the basic hopping sequence based
frequencies, using the Scrambling Definition
ce also
defines the hopping shift mechanism for generating different actual
3. g
AU in order to minimize interference between
adjacent AUs.
The Flexible Hopping Definition menu enables defining the hopping
frequencies and the method of scrambling the selected frequencies for
generating the basic hopping sequence. It also enables to view the
selected hopping frequencies and the current hopping sequence (based
on the previous selections made before the last reset). The new
selections will come into effect only after the next reset.
The default selection (including the case where all frequencies were
deleted) is a single frequency, 915 MHz.
on the set of selected
sub-menu. The method of generating the basic sequen
hopping sequences.
Configure the Hopping Shift parameter to define a different hoppin
sequence for each
BreezeACCESSS 900 System Manual
D-2