User's Manual

Legal Rights
Line Voltage
Before connecting this instrument to the power line, make sure that the
voltage of the power source matches the requirements of the
instrument.
Installation Codes
The system must be installed according to country national electrical
codes. For North America, equipment must be installed in accordance to
the US National Electrical Code (NEC) Articles 110-16, 110-17 and
110-18 and the Canadian Electrical Code (CEC), Sections 2-202 and
2-308. Wiring methods are to be in accordance to NEC Article 300 and
CEC Section 12.
Over-Current Protection
A readily accessible external Listed branch circuit over-current
protective device rated 15 A must be provided for the Cell Extender.
Radio
The instrument transmits radio energy during normal operation. To
avoid possible harmful exposure to this energy, do not stand or work for
extended periods of time in front of its antenna. The long-term
characteristics or the possible physiological effects of Radio Frequency
Electromagnetic fields have not been yet fully investigated.
Outdoor Units and Antennas Installation and Grounding
Be sure that the outdoor unit, the antennas and the supporting
structures are properly installed to eliminate any physical hazard to
either people or property. Verify that the outdoor units and the antenna
masts are grounded so as to provide protection against voltage surges
and static charges. Make sure that the installation of the outdoor units,
antennas, supporting structures and cables is performed in accordance
with all relevant national and local building and safety codes.
Manual Revision 1.0 - Preliminary
v