User's Manual
Table Of Contents
- System Description
- Introducing BreezeACCESS 900
- Cell Extender
- Subscriber Unit
- BreezeCONFIG( ACCESS
- Specifications
- Installing the Cell Extender
- Installing the SU-I Subscriber Unit
- Set-up and Initialization
- Aligning the Cell Extender’s SU-RA Antenna
- Aligning the SU-I Subscriber Unit’s Antenna
- Verifying Proper Operation
- Flexible Hopping Definition Mode
Appendix A - Wiring 10Base-T Jacks
Verifying Proper Operation
The following sections describe how to verify the correct functioning of
the various unit, Ethernet connections and data connectivity.
SU-RA-2.4 Radio Unit LEDs
To verify the correct operation of the SU-RA, examine the LED
indicators located on the bottom panel of the unit.
The following tables list the provided LEDs and their associated
indications.
Table 3-5: SU-I LEDs
Name Description Functionality
POWER Power Supply On - After successful power up
Off - Power off
WLNK Wireless Link
Activity
Blinking - Receiving packets from the wireless link
Off - no reception of packets from the wireless link
ETHERNET Ethernet Activity Blinking - Reception of data from Ethernet LAN
Off - No reception of data from Ethernet LAN
Very low quality reception or not
synchronized with Access Unit
Low quality reception (usually enabling
1Mbps traffic)
Medium quality reception (usually
enabling 2 Mbps traffic)
SIGNAL
QUALITY
Received Signal
Quality
High quality reception (usually enabling 3
Mbps traffic)
BreezeACCESSS 900 System Manual
A
-12