User's Manual
Table Of Contents
- System Description
- Introducing BreezeACCESS 900
- Cell Extender
- Subscriber Unit
- BreezeCONFIG( ACCESS
- Specifications
- Installing the Cell Extender
- Installing the SU-I Subscriber Unit
- Set-up and Initialization
- Aligning the Cell Extender’s SU-RA Antenna
- Aligning the SU-I Subscriber Unit’s Antenna
- Verifying Proper Operation
- Flexible Hopping Definition Mode
Set-up and Initialization
Table 3-3: Basic Parameters in the Cell Extender’s AU
Parameter Default Value Comment
IP Address 10.0.0.1
Subnet Mask 255.0.0.0
Default Gateway Address 0.0.0.0
DHCP Options Disable
Access to DHCP From Ethernet Only
ESSID ESSID1
Operator ESSID Option Enable Operator ESSID
(AU) ESSID1
Operator ESSID ESSID1
Flexible Hopping Definition According to the
spectrum analysis survey
Transmit Antenna Antenna 2 Must remain Antenna 2
Transmit Level 23 dBm
ATPC Option Disable
VLAN Link Type Hybrid
VLAN ID-Management 65535
Authentication Algorithm Open System Can be changed to
Shared Key only after
configuring at least one
WEP Key
WEP Key 1-4 0000000000 (none)
Manual Revision 1.0 - Preliminary
A
-7