User's Manual
Table Of Contents
- System Description
- Introducing BreezeACCESS 900
- Cell Extender
- Subscriber Unit
- BreezeCONFIG( ACCESS
- Specifications
- Installing the Cell Extender
- Installing the SU-I Subscriber Unit
- Set-up and Initialization
- Aligning the Cell Extender’s SU-RA Antenna
- Aligning the SU-I Subscriber Unit’s Antenna
- Verifying Proper Operation
- Flexible Hopping Definition Mode
Chapter 2 - Installation
Connecting the Unit to the CPE and Power Outlet
The unit operates on a power input of 5VDC, supplied by the power
transformer included with the unit.
To connect the unit to the CPE and Power Outlet:
1. Plug the output jack of the power transformer into the DC input
jack (marked DC IN 5V) located on the side of the unit.
2. Connect the power transformer to a power outlet - 110/ 220VAC.
3. Use a straight Ethernet 10Base-T cable to connect a PC to the
Ethernet port located on the rear panel of the unit.
BreezeACCESSS 900 System Manual
2-20