User's Manual
Table Of Contents
- System Description
- Introducing BreezeACCESS 900
- Cell Extender
- Subscriber Unit
- BreezeCONFIG( ACCESS
- Specifications
- Installing the Cell Extender
- Installing the SU-I Subscriber Unit
- Set-up and Initialization
- Aligning the Cell Extender’s SU-RA Antenna
- Aligning the SU-I Subscriber Unit’s Antenna
- Verifying Proper Operation
- Flexible Hopping Definition Mode
Installing the Cell Extender
Installing the Interface Unit
The following sections describe how to install the Interface Unit,
including wall mounting the unit, preparing the power cable and
connecting the ground and IF cables. In addition, for those requiring a
local Ethernet connection, a description of how to connect the Ethernet
cable is provided.
Figure 2-4: Interface Unit Bottom Panel
Wall Mounting the Interface Unit
The Interface Unit must be installed on a wall with the bottom panel,
which includes the connectors, facing downward.
Figure 2-5: Wall Mounting the Interface Unit
Manual Revision 1.0 - Preliminary
2-9