User's Manual
Table Of Contents
- System Description
- Introducing BreezeACCESS 900
- Cell Extender
- Subscriber Unit
- BreezeCONFIG( ACCESS
- Specifications
- Installing the Cell Extender
- Installing the SU-I Subscriber Unit
- Set-up and Initialization
- Aligning the Cell Extender’s SU-RA Antenna
- Aligning the SU-I Subscriber Unit’s Antenna
- Verifying Proper Operation
- Flexible Hopping Definition Mode
Specifications
Physical and Electrical
Subscriber Unit
Mechanical
Table 1-8: Mechanical Specifications, Subscriber Unit
Unit Structure Dimensions (cm) Weight
(kg/lb)
General An indoor SU-I unit and an outdoor
antenna
SU-I Metal box, desktop or wall
mountable
15 x 8.7 x 3.7 0.35 / 0.77
Power
supply
Plugged directly into the mains
socket (3 AC power pins), 1.5 meter
DC cable with a right angle phone
7.5 x 3.1 x 5 0.38 / 0.84
Antenna Plastic radome with aluminum base
plate, 1.5”-4” pole mountable
30.5 x 30.5 x1.5 1.5 / 3.3
Connectors
Table 1-9: Connectors, Subscriber Unit
Unit Connector Description
ETH 10BaseT Ethernet (RJ-45) with 2 embedded LEDs.
Cable connection to a PC: Straight
Port 2 (antenna) Proprietary SMA jack, 50 ohm
Monitor 3-pin low profile
SU-I
AC IN Standard DC 2.5 mm jack to external power supply
Antenna Antenna N-Type jack, 50 ohm
Manual Revision 1.0 - Preliminary
1-11