User's Manual
Table Of Contents
- System Description
- Introducing BreezeACCESS 900
- Cell Extender
- Subscriber Unit
- BreezeCONFIG( ACCESS
- Specifications
- Installing the Cell Extender
- Installing the SU-I Subscriber Unit
- Set-up and Initialization
- Aligning the Cell Extender’s SU-RA Antenna
- Aligning the SU-I Subscriber Unit’s Antenna
- Verifying Proper Operation
- Flexible Hopping Definition Mode
Chapter 1 - System Description
Subscriber Unit
The Subscriber Unit (SU) installed at the customer premises enables the
customer data connection to the Access Unit of the Cell Extender.
The Subscriber Unit provides an efficient platform for high speed
Internet and Intranet services. The use of packet switching technology
provides the user with a connection to the network that is always on,
enabling immediate access to services.
The SU-I-1D-A10-900 miniature Subscriber Unit is designed for
desktop or wall-mount installation. It supports a single Ethernet device
and connects to the customer’s data equipment via a standard IEEE
802.3 10Base-T (RJ-45) interface. The unit is powered from the
110/220 VAC mains. It has one RF connector for an outdoor wall-
mountable 10dBi antenna.
BreezeACCESSS 900 System Manual
1-4