User's Manual
Table Of Contents
- System Description
- Introducing BreezeACCESS 900
- Cell Extender
- Subscriber Unit
- BreezeCONFIG( ACCESS
- Specifications
- Installing the Cell Extender
- Installing the SU-I Subscriber Unit
- Set-up and Initialization
- Aligning the Cell Extender’s SU-RA Antenna
- Aligning the SU-I Subscriber Unit’s Antenna
- Verifying Proper Operation
- Flexible Hopping Definition Mode
Chapter 1 - System Description
Introducing BreezeACCESS 900
BreezeACCESS 900 system allows operators that provide IP services
using BreezeACCESS II to extend the reach of their system and provide
services to clusters of customers that cannot otherwise be reached due
to being obstructed by heavy foliage or other obstacles. Operators can
benefit from the advantage of operating locally in the 900 MHz band,
being able to provide services to customers within a radius of half a mile
in non line of sight environments with heavy foliage.
BreezeACCESS 900 system includes the following components:
Cell Extension Equipment (CX): Provides the interface between the
local system operating in the 900 MHz band and the primary system
operating in the 2.4 GHz band.
Subscriber Units (CPE): BreezeACCESS Subscriber Units operating
in the 900 MHz band.
Alvarion also offers to its customers a special spectrum analysis tool to
enable optimal selection of frequencies and antenna polarization in the
heavily crowded 900 MHz band. For information on this tool, refer to
the Breeze Access Spectrum Analyzer User’s Guide.
BreezeACCESSS 900 System Manual
1-2