User's Manual

IF Based Equipment
1-3
BreezeACCESS 4.0 System Manual
BS-PS-AC Power Supply (one or two per
chassis)
! BS-PS-AC power supply module
! AC power cable
GU-A-BS GPS and Alarms System
! BS-GU module
! GU-RA GPS antenna and receiver
! 1” threaded mounting pole for the GU-RA GPS antenna
! Antenna Mounting kit
Standalone AU-E-NI Access Unit
! AU-RE with a connector to an external antenna (not included)
! Pole mounting kit for the outdoor unit
! AU-NI indoor unit
! Wall mounting kit for the AU-NI unit
! AU-PS power supply with a mains power cord
! Monitor cable
! Documentation CD
Other Items Required for
Installation
! IF cable* (available from Alvarion in different lengths)
! Grounding cable with an appropriate termination
! Antenna* and RF cable* according to specific installation conditions
for units with external separate antennas
! Ethernet cable to connect the equipment to the Ethernet outlet (see
Table 1-1‚ page 1-4)
! Telephone cord for connecting a Subscriber Unit with voice support
to a telephone set (RJ 11 connector at the Subscriber Unit side)
! GPS cable (30, 60 or 120 meter – supplied separately according to
order)*
! SYNC cable* – for daisy-chaining GPS modules (if necessary)
! Alarms-In and Alarms-Out cables* for the GPS module (if necessary)
! Installation tools and materials
For local configuration of parameters:
! A portable PC with Terminal Emulation software and Monitor cable*
(Monitor cable is supplied with Access Units)
–Or–
! A portable PC equipped with an Ethernet card and with Telnet
software, and an Ethernet cable (see Table 1-1‚ page 1-4)