User's Manual

Appendix B
B-35
BreezeACCESS 4.0 System Manual
Voice Parameters
*AlternateGkOption
710.3.4.1.24
(*DialingParams 24)
Setting the Alternate Gatekeeper
feature.
EnableManualDiscovery: the
Alternate Gatekeeper IP address is
specified by the Alternate
Gatekeeper IP Address parameter.
EnableAutomaticDiscovery: the
Alternate Gatekeeper IP address is
received from the Primary GK.
Integer
disable (0)
enableManualDiscovery (1)
enableAutomaticDiscovery (2)
na (255)
*AlternateGkIPAddress
710.3.4.1.25
(*DialingParams 25)
To set the Alternate Gatekeeper IP
address when Alternate
Gatekeeper Option is set to
enableManualDiscovery.
IP Address
*CallerID
710.3.4.1.26
(*DialingParams 26)
To defines whether the unit will
support generation of Caller ID
(CID) signaling and if CID is
supported, which standard will be
used.
disable (0): No CID signalling
etsiDtAs (1): CID signalling in
accordance with ETSI 300-659-1,
using Dual Tone Alerting Signal
etsiRpAs (2): CID signalling in
accordance with ETSI 300-659-1,
using Ringing Pulse Alerting Signal
etsiRinging (4): CID signalling in
accordance with ETSI 300-659-1,
transmitting data during the first
long silence between two ring
patterns.
bellcoreMdmf (5): CID signaling in
accordance with Bellcore 202,
using Multiple Data Message
Format (MDMF) which includes a
name field in addition to the date,
time and number.
bellcoreSdmf (6): CID signaling in
accordance with Bellcore 202,
using Single Data Message Format
(SDMF) which includes the date,
time and number.
Integer
disable (0)
etsi3006591DtAs (1)
etsi3006591RpAs (2)
etsi3006591Ringing (4)
bellcore202Mdmf (5)
bellcore202Sdmf (6)
na (255)
*StopDialingIndicator
710.3.4.1.27
(*DialingParams 28)
To enable/disable the use of the #
sign to indicate end of dialing
disable: The # sign is interpreted as
a part of the dialed sequence. End
of dialing is determined by the
*StopDialingTimeOut parameter.
enable: The # sign is interpreted as
indicating end of dialing sequence.
Integer
disable (0)
enable (1)
na (255)
*StopDialingTimeOut
710.3.4.1.28
(*DialingParams 28)
To define the inactivity time
following the last dialed digit that
will be identified by the unit as an
indication to end of dialing.
Integer
3 – 60 (seconds)
na (255)
MIB Parameter
(Location in Parenthesis)
Description Values
*VoiceParams
710.3.4.2
(brzPhonMib 2)
*VoiceVolume
710.3.4.2.1
(*VoiceParams 1)
Gain of signal to earphone. Integer
0-20 (-dB)
na (255)
*EchoCancellation
710.3.4.2.3
(*VoiceParams 3)
Enables or disables the echo
cancellation feature.
Integer
disable (0)
enable (1)
na (255)