User's Manual
Table Of Contents
- System Manual Book 1: System Description
- Introduction
- System Components
- Specifications
- System Specifications
- Radio and Modem
- Data Communication
- Voice/Fax (Subscriber Units with voice support)
- Telephony (Subscriber Units with voice support)
- IF Indoor – Outdoor Communication (SU-A/E, AU-E-NI, AU-E-BS)
- Configuration and Management
- GU-RA GPS Radio
- GU-RA to BS-GU Communication
- Environmental
- Standards Compliance, General
- Physical Specifications
- System Specifications
- System Manual Book 2: Installation
- IF-Based Equipment
- Packing Lists
- Guidelines for Selection of Equipment Locations
- Installing the Outdoor Unit
- Installing the SU-NI and AU-NI Indoor Unit
- Installing Modular Base Station Equipment
- Installing the GU-A-BS GPS and Alarms System
- IF-Based Equipment
- System Manual Book 3: Commissioning
- System Manual Book 4: Operations and Administration
- Accessing the Monitor Program
- Menus and Parameters
- Main Menu
- Info Screens Menu
- Unit Control Menu
- Basic Configuration Menu
- Site Survey Menu
- Advanced Configuration Menu
- IP Parameters (AU, SU and GU)
- Air Interface Parameters (AU and SU)
- Network Management Parameters (AU, SU and GU)
- Bridge Parameters (AU, SU and GU)
- Performance Parameters (AU and SU)
- Service Parameters (AU and SU)
- Security Parameters (AU and SU)
- Voice Parameters (Subscriber Units with Voice Support Only)
- Dialing Parameters (Subscriber Units with Voice Support Only)
- Telephony Signals (Subscriber Units with Voice Support Only)
- Hopping Parameters (GU)
- Alarm Parameters (GU)
- Configuration Download/Upload
- System Manual: Appendices
Appendix B
B-27
BreezeACCESS 4.0 System Manual
*AdbTxFrames3M
710.3.3. 8.5.2.1.8
(*AdbEntry 8)
Applicable to AU Only. Read-only. Counts the
total number of frames (excluding
retransmissions) that were transmitted to the SU
over the wireless link at 3Mbps.
Counter
*AdbRTxTotal
710.3.3. 8.5.2.1.9
(*AdbEntry 9)
Applicable to AU Only. Read-only. Counts the
total number of frames that were retransmitted to
the SU over the wireless link.
Counter
*AdbRTx1M
710.3.3. 8.5.2.1.10
(*AdbEntry 10)
Applicable to AU Only. Read-only. Counts the
total number of frames that were retransmitted to
the SU over the wireless link at 1Mbps.
Counter
*AdbRTx2M
710.3.3. 8.5.2.1.11
(*AdbEntry 11)
Applicable to AU Only. Read-only. Counts the
total number of frames that were retransmitted to
the SU over the wireless link at 2Mbps.
Counter
*AdbRTx3M
710.3.3. 8.5.2.1.12
(*AdbEntry 12)
Applicable to AU Only. Read-only. Counts the
total number of frames that were retransmitted to
the SU over the wireless link at 3Mbps.
Counter
*AdbTxDroppedFrames
710.3.3. 8.5.2.1.13
(*AdbEntry 13)
Applicable to AU Only. Read-only. Counts the
total number of frames intended to the SU that
were dropped because they were retransmitted
to the extent of the maximum allowed number of
retransmissions without being acknowledged.
Counter
*AdbRxFramesTotal
710.3.3. 8.5.2.1.14
(*AdbEntry 14)
Applicable to AU Only. Read-only. Counts the
total number of frames that were received from
the SU over the wireless link.
Counter
*AdbCirTx
710.3.3. 8.5.2.1.16
(*AdbEntry 16)
Applicable to AU Only. Read only. The value
configured in the relevant SU for the CIR: SU to
AU parameter.
Integer
0-2200
(Kbps)
*AdbMirTx
710.3.3. 8.5.2.1.17
(*AdbEntry 17)
Applicable to AU Only. Read only. The value
configured in the relevant SU for the MIR: SU to
AU parameter.
Integer
32-2200
(Kbps)
*AdbCirRx
710.3.3. 8.5.2.1.18
(*AdbEntry 18)
Applicable to AU Only. Read only. The value
configured in the relevant SU for the CIR: AU to
SU parameter.
Integer
0-2200
(Kbps)
*AdbMirRx
710.3.3. 8.5.2.1.194
(*AdbEntry 19)
Applicable to AU Only. Read only. The value
configured in the relevant SU for the MIR: AU to
SU parameter.
Integer
32-2200 (Kbps)
*AdbCirMaxDelay
710.3.3. 8.5.2.1.20
(*AdbEntry 20)
Applicable to AU Only. Read only. The value
configured in the applicable SU for *MaxDelay
parameter.
Integer
*AdbStatus
710.3.3. 8.5.2.1.21
(*AdbEntry 21)
Applicable to AU Only. Read only. The status of
the relevant SU.
Integer
associated (1)
authenticated (2)
notAuthenticated 3)
*AdbSwVersion
710.3.3. 8.5.2.1.22
(*AdbEntry 22)
Applicable to AU Only. Read only. The SW
version of the relevant SU.
DisplayString
*AdbRssi
710.3.3. 8.5.2.1.23
(*AdbEntry 23)
Applicable to AU Only. Read only. The average
received signal level based on frames received
by the AU from the relevant SU, in RSSI units.
Integer
*AdbDbm
710.3.3. 8.5.2.1.244
(*AdbEntry 24)
Applicable to AU Only. Read only. The average
received signal level based on frames received
by the AU from the relevant SU, in dBm units.
DisplayString