User's Manual

B-26
BreezeACCESS 4.0 System Manual
Manual Revision: 1.01
*ReceivingUnits
710.3.3. 8.3
(*SiteSurvey 3)
*AveragePower
710.3.3. 8.3.1
(*ReceivingUnits 1)
Applicable to SU only. Read-only. Represents
the average Signal Strength of received frames.
DisplayString (SIZE(32))
*RssiOrDbm
710.3.3. 8.3.2
(*ReceivingUnits 2)
Applicable to SU and AU. Selects the
measurement units used to display the average
received signal strength.
Integer
rssi (0)
dBm (1)
*PerHopStatistics
710.3.3. 8.4
(*SiteSurvey 4)
Applicable to SU and AU.
*ResetPerHopStatistics
710.3.3. 8.4.1
(*PerHopStatistics 1)
Applicable to SU and AU. Reset the Per Hop
Statistics counters.
Integer
noReset (0)
reset (1)
*MacAddressDatabase
710.3.3. 8.5
(*SiteSurvey 5)
Applicable to AU only. Database by MAC
Addresses for all SUs associated with the AU.
The databse include parameters learned by the
AU from the SUs and some counters of wireless
traffic between the AU and the relevant SU, as
measured by the AU.
*AdbResetAllCounters
710.3.3. 8.5.1
(*MacAddressDatabase 1)
Applicable to AU only. To reset all the counters
for all SUs in the MAC Address Database. This
includes the following counters:
*AdbTxFramesTotal
*AdbTxFrames1M
*AdbTxFrames2M
*AdbTxFrames3M
*AdbRTxFramesTotal
*AdbRTxFrames1M
*AdbRTxFrames2M
*AdbRTxFrames3M
*AdbTxDroppedFrames
*AdbRxFramesTotal
noReset (0)
reset (1)
*AdbTable
710.3.3. 8.5.2
(*MacAddressDatabase 2)
Applicable to AU Only. Not accessible. MAC
Address Database table.
*AdbEntry
710.3.3. 8.5.2.1
(*AdbTable 1)
Applicable to AU Only. Not accessible. An entry
in the MAC Address Database table.
*AdbIndex
710.3.3. 8.5.2.1.1
(*AdbEntry 1)
Applicable to AU Only. Read only. The index of
an entry in the MAC Address Database table.
Integer
*AdbMacAddress
710.3.3. 8.5.2.1.2
(*AdbEntry 2)
Applicable to AU Only. Read only. The MAC
Address of an SU entry in the MAC Address
Database table.
MAC Address
*AdbMaxRate
710.3.3. 8.5.2.1.3
(*AdbEntry 3)
Applicable to AU Only. Read only. The value
configured in the relevant SU for the Maximum
Data Rate parameter.
Integer
1, 2 or 3 (Mbps)
*AdbCurrentTxRate
710.3.3. 8.5.2.1.4
(*AdbEntry 4)
Applicable to AU Only. Read only. The current
transmit rate to the SU.
Integer
1, 2 or 3 (Mbps)
*AdbTxFramesTotal
710.3.3. 8.5.2.1.5
(*AdbEntry 5)
Applicable to AU Only. Read-only. Counts the
total number of frames (excluding
retransmissions) that were transmitted to the SU
over the wireless link.
Counter
*AdbTxFrames1M
710.3.3. 8.5.2.1.6
(*AdbEntry 6)
Applicable to AU Only. Read-only. Counts the
total number of frames (excluding
retransmissions) that were transmitted to the SU
over the wireless link at 1Mbps.
Counter
*AdbTxFrames2M
710.3.3. 8.5.2.1.7
(*AdbEntry 7)
Applicable to AU Only. Read-only. Counts the
total number of frames (excluding
retransmissions) that were transmitted to the SU
over the wireless link at 2Mbps.
Counter