User's Manual

B-24
BreezeACCESS 4.0 System Manual
Manual Revision: 1.01
*FramesDroppedVoice
710.3.3. 8.2.3.14
(*WlanCounters 14)
Applicable to SU and AU only when the ACSE
Option is enabled. Read-only. The number of
dropped voice frames, including fax and T.38
redundant frames. The voice frames that were
retransmitted to the extent of the maximum
allowed number of retransmissions for voice
frames without being acknowledged.
Counter
*TotalRetransmittedFrames
710.3.3. 8.2.3.15
(*WlanCounters 15)
Applicable to SU and AU. Read-only. The total
number of retransmissions of frames (counts all
unsuccessful transmissions/retransmissions).
Counter
*RetransmittedFramesData
710.3.3. 8.2.3.16
(*WlanCounters 16)
Applicable to SU and AU only when the ACSE
Option is enabled. Read-only. The total number
of retransmissions of data frames (counts all
unsuccessful transmissions/retransmissions).
Counter
*RetransmittedFramesVoice
710.3.3. 8.2.3.17
(*WlanCounters 17)
Applicable to SU and AU only when the ACSE
Option is enabled. Read-only. The total number
of retransmissions of voice frames, including fax
and T.38 redundant frames (counts all
unsuccessful transmissions/retransmissions).
Counter
*TotalTxErrors
710.3.3. 8.2.3.19
(*WlanCounters 19)
Applicable to SU and AU. Read-only. The
number of transmit errors that have occurred.
Counter
*TotalTxErrors
710.3.3. 8.2.3.20Hw
(*WlanCounters 20)
Applicable to SU and AU. Read-only. The
number of transmit errors that have occurred
due to an hardware problem.
Counter
*TotalTxErrorsAbr
710.3.3. 8.2.3.21
(*WlanCounters 21)
Applicable to SU and AU. Read-only. The
number of transmit errors that have occurred
because transmission has been aborted before
completion due to internal problems in the DSP.
Counter
*TotalTxErrorsCsl
710.3.3. 8.2.3.22
(*WlanCounters 22)
Applicable to SU and AU. Read-only. The
number of transmit errors that have occurred
because transmission was cancelled due to the
modem being busy receiving data.
Counter
*TotalTxErrorsAckTOut
710.3.3. 8.2.3.23
(*WlanCounters 23)
Applicable to SU and AU. Read-only. The
number of transmit errors that have occurred
because of an Acknowledge Timeout–a frame
that was not acknowledged within the time
defined by the Acknowledge Delay Limit
parameter.
Counter
*TotalTxErrorsFail
710.3.3. 8.2.3.24
(*WlanCounters 24)
Applicable to SU and AU. Read-only. The
number of transmit errors that have occurred
because of an internal timeout in the modem.
Counter
*TotalTxErrorsAckCrc
710.3.3. 8.2.3.25
(*WlanCounters 25)
Applicable to SU and AU. Read-only. The
number of transmit errors that have occurred
because of a CRC error in the ACK message.
Counter
*TotalTxErrorsRtsc
710.3.3. 8.2.3.26
(*WlanCounters 26)
Applicable to SU and AU. Read-only. The
number of transmit errors that have occurred
because RTS was sent but CTS was not
received (RTS collision).
Counter
*TotalTxErrorsEod
710.3.3. 8.2.3.27
(*WlanCounters 27)
Applicable to SU and AU. Read-only. The
number of transmit errors that have occurred
because there was not enough time left to
transmit the message prior to the end of the
Dwell.
Counter
*TotalReceivedDataFrames
710.3.3. 8.2.3.28
(*WlanCounters 28)
Applicable to SU and AU. Read-only. The total
number of data frames received from the
wireless media, including duplicate frames.
Counter
*ReceivedDataFramesHigh
710.3.3. 8.2.3.29
(*WlanCounters 29)
Applicable to SU and AU. Read-only. The total
number of data frames received from the
wireless media and routed via the receive High
queue, including duplicate frames.
Counter
*ReceivedDataFramesLow
710.3.3. 8.2.3.30
(*WlanCounters 30)
Applicable to SU and AU. Read-only. The total
number of data frames received from the
wireless media and routed via the receive Low
queue, including duplicate frames.
Counter