User's Manual

Appendix B
B-23
BreezeACCESS 4.0 System Manual
*TotalRxFramesFromWireless
710.3.3. 8.2.3.2
(*WlanCounters 2)
Applicable to SU and AU. Read-only. The total
number of frames that were received from the
wireless media. The count includes data and
control and management frames, including
beacons received from the AU. The count does
not include frames that were discarded internally,
bad frames and duplicate frames.
Counter
*TotalRetransmittedFragments
710.3.3. 8.2.3.3
(*WlanCounters 3)
For future use Counter
*WlanFramesDropped
710.3.3. 8.2.3.4
(*WlanCounters 4)
Applicable to SU and AU. Read-only. The
number of dropped frames. The frames that
were retransmitted to the extent of the maximum
allowed number of retransmissions without being
acknowledged.
Counter
*TransmittedFramesToWirelessData
710.3.3. 8.2.3.5
(*WlanCounters 5)
Applicable to SU and AU only when the ACSE
Option is enabled. Read-only. The number of
data frames transmitted to the wireless media.
The count includes one count for each data
frame that was transmitted successfully
(excluding retransmissions).
Counter
*TransmittedFramesToWirelessVoice
710.3.3. 8.2.3.6
(*WlanCounters 6)
Applicable to SU and AU only when the ACSE
Option is enabled. Read-only. The number of
voice frames, including fax and redundant T.38
frames, transmitted to the wireless media. The
count includes one count for each frame that
was transmitted successfully (excluding
retransmissions).
Counter
*TransmittedFramesToWirelessBeacon
710.3.3. 8.2.3.7
(*WlanCounters 7)
Applicable to AU only when the ACSE Option is
enabled. Read-only. The number of beacons
transmitted to the wireless media. The count
includes one count for each beacon that was
transmitted successfully (excluding
retransmission attempts).
Counter
*TotalSubmittedFrames
710.3.3. 8.2.3.8
(*WlanCounters 8)
Applicable to SU and AU. Read-only. The total
number of data and RTP frames submitted to the
bridge for transmission to the wireless media.
The count does not include control and
management frames, and retransmissions.
Counter
*SubmittedFramesHigh
710.3.3. 8.2.3.9
(*WlanCounters 9)
Applicable to SU and AU. Read-only. Counts the
number of frames submitted to the bridge via the
High queue for transmission to the wireless
media. When the ACSE Option is enabled, it
counts data and RTP frames. When the ACSE
Option is disabled, it counts only data frames.
Counter
*SubmittedFramesMid
710.3.3. 8.2.3.10
(*WlanCounters 10)
Applicable to SU and AU. Read-only. Counts the
number of frames submitted to the bridge via the
Mid queue for transmission to the wireless
media. When the ACSE Option is enabled, it
counts data and RTP frames. When the ACSE
Option is disabled, it counts only data frames.
Counter
*SubmittedFramesLow
710.3.3. 8.2.3.11
(*WlanCounters 11)
Applicable to SU and AU. Read-only. Counts the
number of frames submitted to the bridge via the
Low queue for transmission to the wireless
media. When the ACSE Option is enabled, it
counts data and RTP frames. When the ACSE
Option is disabled, it counts only data frames.
Counter
*SubmittedFramesVoice
710.3.3. 8.2.3.12
(*WlanCounters 12)
Applicable to SU and AU only when the ACSE
Option is enabled. Read-only. Counts the
number of voice frames, including fax and T.38
redundant frames, submitted to the bridge for
transmission to the wireless media.
Counter
*FramesDroppedData
710.3.3. 8.2.3.13
(*WlanCounters 13)
Applicable to SU and AU only when the ACSE
Option is enabled. Read-only. The number of
dropped data frames. The data frames that were
retransmitted to the extent of the maximum
allowed number of retransmissions for data
frames without being acknowledged.
Counter