User's Manual

Appendix B
B-17
BreezeACCESS 4.0 System Manual
*CurrentTxPwrLvl
710.3.3. 6.18
(*AirInterface 18)
Applicable to SU-R, SU-I and AU-I
units only.
Enables setting the transmitted
power level according to the unit
capabilities.
The medium (2) value is not
applicable to SU-I and AU-I and to
some SU-R products.
Integer
Low (0)
high (1)
medium (2)
*WirelessTrapThreshold
710.3.3. 6.19
(*AirInterface 19)
A wireless link quality threshold for
sending the
*WirelessStatusTRAP,or
*WirelessStatusOfSUsTRAP.
These traps indicate whether the
quality has gone below or above
the specified threshold.
Integer
SU: 0-255 (RSSI units)
AU: 0-100
(% retransmissions)
*NumberOfHoppingFrequenciess
710.3.3. 6.20
(*AirInterface 20)
Applicable to SU and AU. Read-
only. The Number of Hopping
Frequencies used in the AU.
Integer
0-99
na (255)
*OperatorESSID
710.3.3. 6.21
(*AirInterface 21)
Applicable to AU only. A secondary
ESSID to support upgrade of
existing installations. All AUs in the
region should be configured to the
same Operator ESSID to allow a
new SU to associate with any AU.
DisplayString (SIZE(31))
Up to 31 printable ASCII characters, case
sensitive.
*RunTimeESSID
710.3.3. 6.22
(*AirInterface 22)
Applicable to SU only. Read-only.
The ESSID of the associated AU.
DisplayString (SIZE(31))
Up to 31 printable ASCII characters, case
sensitive.
*BestAu
710.3.3. 6.23
(*AirInterface 23)
Best AU Parameters
*BestAuSupport
710.3.3. 6.23.1
(*BestAu 1)
Applicable to SU only. Disable/
enable the Best AU selection
mechanism.
Integer
disable (0)
enable (1)
na (255)
*BestAuNoOfScanningAttempts
710.3.3. 6.23.2
(*BestAu 2)
Applicable to SU only. The number
of scanning attempts to collect
information for the Best AU
decision.
Integer
1 – 255
*NeighborAuTable
710.3.3. 6.23.3
(*BestAu 3)
Applicable to SU only. A table of
data on neighboring AUs. Not
accessible.
*NeighborAuEntry
710.3.3. 6.23.3.1
(*NeighborAuTable 1)
Applicable to SU only. An entry in
the Neighbor AU Table. Not
accessible.
*NeighborAuMacAdd
710.3.3. 6.23.3.1.1
(*NeighborAuEntry 1)
Applicable to SU only. Read-only. A
MAC address of an AU in the
Neighbor AU Table.
MAC address
*NeighborAuESSID
710.3.3. 6.23.3.1.2
(*NeighborAuEntry 2)
Applicable to SU only. Read-only.
The ESSID of an AU in the
Neighbor AU Table.
DisplayString (SIZE(31))
Up to 31 printable ASCII characters, case
sensitive.
*NeighborAuRssi
710.3.3. 6.23.3.1.3
(*NeighborAuEntry 3)
Applicable to SU only. Read-only.
The received signal strength in
RSSI units of an AU in the
Neighbor AU Table.
Integer
*NeighborAuAssocLoadStatus
710.3.3. 6.23.3.1.4
(*NeighborAuEntry 4)
Applicable to SU only. Read-only.
Neighbor AU association load
status in the Neighbor AU Table.
Integer
notFull (0)
full (1)
na (255)
*NeighborAuMark
710.3.3. 6.23.3.1.5
(*NeighborAuEntry 5)
Applicable to SU only. Read-only.
Neighbor AU mark in the Neighbor
AU Table.
Integer
*NeighborAuIdx
710.3.3. 6.23.3.1.6
(*NeighborAuEntry 6)
Applicable to SU only. Read-only.
An index of an entry in the
Neighbor AU Table.
Integer