User's Manual

Appendix B
B-15
BreezeACCESS 4.0 System Manual
*SubBandsTableIdx
710.3.3. 6.15.4.1.2
(*SubBandEntry 2)
Applicable to SU and AU only.
Read-only. A Sub-Band Table entry
index.
Integer
*SubBandExp
710.3.3. 6.15.4.1.3
(*SubBandEntry 3)
Applicable to SU and AU only.
Read-only. A Sub-Band in the Sub-
Bands Table.
DisplayString (SIZE(10))
*CurrentHoppingSeqTable
710.3.3. 6.15.5
(*FlexSubBandDef 5)
Applicable to SU and AU only. The
list of hopping frequencies in the
Current Hopping Sequence. Not
accessible.
*CurrentHoppingSeqEntry
710.3.3. 6.15.5.1
(*CurrentHoppingSeqTable 1)
Applicable to SU and AU only. A
Current Hopping Sequence Table
entry. Not accessible.
*HopSeqSubBand
710.3.3. 6.15.5.1.1
(*CurrentHoppingSeqEntry 1)
Applicable only to SW version 2.6.
Applicable to SU and AU only.
Read-only. A frequency in the
Current Hopping Sequence Table.
Integer
*CurrHopSeqTableIdx
710.3.3. 6.15.5.1.2
(*CurrentHoppingSeqEntry 2)
Applicable to SU and AU only.
Read-only. A Current Hopping
Sequence Table index.
Integer
*CurrSubBandExp
710.3.3. 6.15.5.1.3
*CurrentHoppingSeqEntry 3)
Applicable to SU and AU only.
Read-only. A frequency in the
Current Hopping Sequence Table.
DisplayString (SIZE(10))
*ChannelSpacing
710.3.3. 6.15.5
(*FlexSubBandDef 5)
Applicable to SU and AU in
BreezeACCESS XL family only.
Applicable only in Flexible Hopping
Definition mode. Defines the
minimum distances between two
frequencies. (Not available in some
products that only support a 2MHz
Channel Spacing)
Integer
space1_75MHz (0)
space1MHz (1)
space2MHz (2)
na (255)
*AddFlexHopChannels
710.3.3. 6.15.7
(*FlexSubBandDef 7)
Applicable to SU and AU in
BreezeACCESS MMDS family only.
Adds MMDS channels to the list of
channels to be used.
DisplayString (SIZE(244))
Up to 244 printable ASCII characters in one
of the following formats:
1. A1
2. B2,C3,G4 (no spaces)
*DelFlexHopChannels
710.3.3. 6.15.8
(*FlexSubBandDef 8)
Applicable to SU and AU in
BreezeACCESS MMDS family only.
Deletes MMDS channels from the
list of channels to be used.
DisplayString (SIZE(244))
Up to 244 printable ASCII characters in one
of the following formats:
1. A1
2. B2,C3,G4 (no spaces)
*ScramblingDefinition
710.3.3. 6.15.9
(*FlexSubBandDef 9)
Applicable to SU and AU.
Scrambling parameters.
*ScramblingMode
710.3.3. 6.15.9.1
(*ScramblingDefinition 1)
Applicable to SU and AU. The
method of scrambling the
frequencies defined in the Flexible
Hopping Definition process for
generating the basic hopping
sequence.
Standard mode - this mode
automatically scrambles the
frequencies according to the
algorithm used in SW version 3.x
and lower. It is suitable for up to 6
frequencies.
Enhanced mode - this mode
automatically scrambles the
frequencies according to a new
algorithm.
Manual mode - The user defines
the hopping sequence using the
frequencies indexes.
Integer
standardMode (1)
manualMode (2)
enhancedMode(3)
*ManualSequenceDefinition
710.3.3. 6.15.9.2
(*ScramblingDefinition 2)
Applicable to SU and AU.
Manual scrambling definition.
Configuring the sequence using the
frequenciesí indexes.
Display String.
Up to 244 printable ASCII characters.
Allowed Range of Indexes: '1' to 'Number of
Channels'.
Sequence Length must be equal to 'Number
of Channels'.
Use a comma to separate between entries.