User's Manual

Appendix B
B-9
BreezeACCESS 4.0 System Manual
*VlanRelayingSupport
710.3.3. 5.2.8.1
(*VLANRelaying 1)
Applicable to AU only. Enables or disables
VLAN Relaying. (applicable in Trunk links
only)
Integer
disable (0)
enable (1)
na (255)
*VlanRelayingTable
710.3.3. 5.2.8.2
(*VLANRelaying 2)
Applicable to AU only. A VLAN Relaying Table
of up to 20 VLAN IDs of devices to which data
frames are relayed when VLAN Relaying is
Enabled. (applicable in Trunk links only). Not
accessible.
*VlanRelayingEntry
710.3.3. 5.2.8.2.1
(*VlanRelayingTable 1)
Applicable to AU only. A VLAN Relaying Table
entry. (applicable in Trunk links only). Not
accessible.
*VlanRelayingIdx
710.3.3. 5.2.8.2.1.1
(*VlanRelayingEntry) 1
Applicable to AU only. A read only table index
for a VLAN entry in the VLAN Relaying Table.
Integer
0 - 19
*VlanIdRelaying
710.3.3. 5.2.8.2.1.2
(*VlanRelayingEntry 2)
Applicable to AU only. The list of VLAN ID's in
the VLAN ID Relaying Table. To Remove a
VLAN ID - SET the corresponding entry to 0.
To Add a new VLAN ID SET an entry which is
currently 0.
Integer
1-4094
0=remove entry.
*VLANTrafficPriority
710.3.3. 5.2.9
(*VLANSupport 9)
VLAN Traffic Priority Parameters
*VlanDataPriority
710.3.3. 5.2.9.1
(*VLANTrafficPriority 1)
Applicable to SU only.
Priority tagging for data frames. Applicable to
Access Link only.
Integer
0 – 7
na (255)
*VlanVoicePriority
710.3.3. 5.2.9.2
(*VLANTrafficPriority 2)
Applicable to SU with voice only. Priority
tagging for voice frames. Applicable to Access
Link and Trunk Link only.
Integer
0 – 7
na (255)
*VlanManagementPriority
710.3.3. 5.2.9.3
(*VLANTrafficPriority 3)
Applicable to AU, SU and GU. Priority tagging
for management frames. Applicable to units
with a *ManagementVID other than 65535.
Integer
0 – 7
na (255)
*PriorityQueueThreshold
710.3.3. 5.2.9.4
(*VLANTrafficPriority 4)
Applicable to AU and SU. Priority threshold for
tagged frames received from Ethernet port.
Applicable to Hybrid Link and Trunk Link only.
Integer
0 – 7
na (255)
*BridgeAgingTime
710.3.3. 5.3
(*BridgeParameters 3)
Applicable to AU and SU. Bridge aging time
for devices learned from both the Ethernet and
wireless link ports.
Integer
100 – 2000
(seconds)
*LanToWirelessLinkBridgeMode
710.3.3. 5.4
(*BridgeParameters 4)
Applicable to AU only.
Controls the flow of information from Ethernet
to Wlan.
rejectUnknown: Permits only transmission to
addresses known to be on the Wlan side.
forwardUnknown: Forwards all frames, except
those sent to addresses known to be on the
Ethernet side.
Integer
rejectUnknown (0)
forwardUnknown (1)
na (255)
*BroadcastRelaying
710.3.3. 5.5
(*BridgeParameters 5)
Applicable to AU only.
Enables/disables the relaying of broadcast
messages to the wireless link.
Integer
disable (0)
enable (1)
na (255)
*UnicastRelaying
710.3.3. 5.6
(*BridgeParameters 6)
Applicable to AU only.
Enables/disables the relaying of unicast
messages to the wireless link.
Integer
disable (0)
enable (1)
na (255)
*EthBroadcastingParameters
710.3.3. 5.7
(*BridgeParameters 7)
Applicable to SU only. Ethernet Broadcasting
parameters.
*DHCPBroadcastOverrideFilter
710.3.3. 5.7.1
(*EthBroadcastingParameters 1)
Applicable to SU only. Enables or disables the
broadcasting of DHCP messages, overriding
the general *EthBroadcastFiltering Ethernet
broadcast filtering option
Integer
no (0)
yes (1)
na (255)
* PPPoEBroadcastOverrideFilter
710.3.3. 5.7.2
(*EthBroadcastingParameters 2)
Applicable to SU only. Enables or disables the
broadcasting of PPPoE messages, overriding
the general *EthBroadcastFiltering Ethernet
broadcast filtering option.
Integer
no (0)
yes (1)
na (255)