User's Manual

Appendix B
B-5
BreezeACCESS 4.0 System Manual
User Filtering Parameters
*MirOnlyOption
710.3.3.1.10
(*ServiceParameters 10)
Applicable only to AU when CIR/MIR option is
enabled.
When enabled, the MIR/CIR algorithm fo
determining the actual information rate is
overridden and operates only with the
configured MIR values. The graceful
degradation algorithm is disabled.
disable (0)
enable (1)
na (255)
MIB Parameter
(Location in Parenthesis)
Description Values/Range
*UserFilterParams
710.3.3. 2
(brzAccessMib 2)
Applicable to SU only. User Filtering parameters.
*UserFilterOption
710.3.3.2.1
(*UserFilterParams 1)
Applicable to SU only. Defines user-filtering options.
disable: No filtering.
iPOnly: Only IP protocol frames pass.
userDefinedAddrOnly: Only frames from user defined
IP addresses pass.
pPPoE Only: Only PPPoE frames pass.
Integer
disable (0)
iPOnly (1)
userDefinedAddrOnly(2)
pPPoEOnly (3)
na (255)
*IpFilterTable
710.3.3.2.2
(*UserFilterParams 2)
Applicable to SU only. An IP Filter Table of up to 8 user
defined addresses, or address groups, to be used if the
selected User Filtering option is
userDefinedAddrOnly. Not accessible.
*IpFilterEntry
710.3.3.2.2.1
(*IpFilterTable 1)
Applicable to SU only. An IP Filter Table entry. Not
accessible.
*IpID
710.3.3.2.2.1.1
(*IpFilterEntry 1)
Applicable to SU only. An IP address of an IP Filter
Table entry.
IP Address
*MaskID
710.3.3.2.2.1.2
(*IpFilterEntry 2)
Applicable to SU only. An IP Mask of an IP Filter Table
entry.
Either a mask or a range, but not both can be used to
define an address group.
IP Address
*IpFilterRange
710.3.3.2.2.1.3
(*IpFilterEntry 3)
Applicable to SU only. An addresses range for the IP
Filter Table entry. The first address in the range is the IP
address (*iPID).
Either a mask or a range, but not both can be used to
define an address group.
Integer
0 - 255
*IpFilterIdx
710.3.3.2.2.1.4
(*IpFilterEntry 4)
Applicable to SU only. Read-only. A table index for the
IP Filter Table entry.
Integer
1-8
*DeleteOneUserFilter
710.3.3.2.3
(*UserFilterParams 3)
Applicable to SU only. Deletes a single selected entry
from the IP Filter Table.
Integer
off (0)
firstEntry (1)
secondEntry (2)
thirdEntry (3)
fourthEntry (4)
fifthEntry (5)
sixthEntry (6)
seventhEntry (7)
eighthEntry (8)
na (255)
*DeleteAllUserFilters
710.3.3.2.4
(*UserFilterParams 4)
Applicable to SU only. Deletes all entries from the IP
Filter Table.
Integer
off (0)
deleteAll (1)
off (2)
na (255)