User's Manual

Menus and Parameters
2-77
BreezeACCESS 4.0 System Manual
Table 2-20: Parameters of Call Progress Tones and Ringer – Chile
Table 2-21: Timeouts
Hopping Parameters (GU)
The Hopping Parameters Menu allows configuration of the hopping
mechanism. The GPS modules deliver signals to the Access Units that
insure that their hopping patterns are fully synchronized. This includes
synchronizing the time each unit starts a new hop and ensuring that
units start the hopping sequence simultaneously.
! Number of Hopping Frequencies – Configures the Number of
Hopping Frequencies parameter to guarantee that all the Access
Units managed by the GPS module will start their hopping sequence
simultaneously.
To determine the correct number of hopping frequencies, access the
monitor program in one of the AU units, select Show Basic
Configuration in the Info Screens menu and view the Number of
Hopping Frequencies value displayed.
Frequency 1 Frequency 2 Cadence Duration (s)
Tone Freq
(Hz)
Level
(dB)
Freq
(Hz)
Level
(dB)
On (ms) Off (ms)
Dial Tone 400 -6 0 0 20
Ring Back 400 -6 0 0 1000 3000 120
Busy 400 -6 0 0 500 500 20
Congestion 400 -6 0 0 200 200 20
Error 400 -6 0 0 500 500 20
High Level
Error
400 3 0 0 500 500 20
Ringer 20 1000 3000 120
Country Min. Flash
Detect (ms)
Max Flash
Detect (ms)
Disconnect
(ms)
Inter-digit
(ms)
Called
Party
Release (s)
Germany 120 1000 1000 100 0
USA 120 1000 1000 100 0
Sweden 120 1000 1000 100 0
France 120 1000 1000 100 0
United Kingdom 120 1000 1000 100 0
Belgium 120 1000 1000 100 0
Chile 220 320 320 500 60