User's Manual

2-70
BreezeACCESS 4.0 Operations and Administration
Manual Revision: 1.01
" Forward -> Reverse Battery – Change the polarity from
forward to reverse
" Reverse -> Forward Battery – Change the polarity from
reverse to forward
The default is Forward Battery.
! Caller ID: Defines whether the unit will support generation of Caller
ID (CID) signaling and if CID generation is supported, which
standard will be used. The unit supports two CID signaling
standards:
" Voice band Frequency Shift Keying (FSK) signaling in
accordance with ETSI ETS 300 659 – 1
" 1200-baud tone modulation in accordance with Bellcore 202
standard.
The Caller ID parameter is supported only by units using a Voice card
HW revision D and higher.
The following options are available:
" Disable
" ETSI DT-AS: CID signaling in accordance with ETSI
ETS 300 659 -1, using Dual Tone Alerting Signal to
indicated to the called terminal that CID data transmission
is to be expected.
" ETSI RP-AS: CID signaling in accordance with ETSI
ETS 300 659 -1, using Ringing Pulse Alerting Signal to
indicate to the called terminal that CID data transmission is
to be expected.
" ETSI – During Ringing: CID signaling in accordance with
ETSI ETS 300 659 -1, transmitting CID data during the first
long silence between two ring patterns.
" Bellcore MDMF: CID signaling in accordance with Bellcore
202, using Multiple Data Message Format (MDMF), which
includes a name field in addition to the date, time and
number.
" Bellcore SDMF: CID signaling in accordance with Bellcore
202, using Single Data Message Format (SDMF), which
includes the date, time and number.
! Stop Dialing Timeout: The inactivity time following the last dialed
digit that will be identified by the unit as an indication to end of
dialing.
Valid range: 3 to 60 seconds
Default value: 5 seconds
! Stop Dialing Indicator: Uses the # sign to indicate end of dialing,
thus to speed the dialing process. The options are: