User's Manual
Table Of Contents
- System Manual Book 1: System Description
- Introduction
- System Components
- Specifications
- System Specifications
- Radio and Modem
- Data Communication
- Voice/Fax (Subscriber Units with voice support)
- Telephony (Subscriber Units with voice support)
- IF Indoor – Outdoor Communication (SU-A/E, AU-E-NI, AU-E-BS)
- Configuration and Management
- GU-RA GPS Radio
- GU-RA to BS-GU Communication
- Environmental
- Standards Compliance, General
- Physical Specifications
- System Specifications
- System Manual Book 2: Installation
- IF-Based Equipment
- Packing Lists
- Guidelines for Selection of Equipment Locations
- Installing the Outdoor Unit
- Installing the SU-NI and AU-NI Indoor Unit
- Installing Modular Base Station Equipment
- Installing the GU-A-BS GPS and Alarms System
- IF-Based Equipment
- System Manual Book 3: Commissioning
- System Manual Book 4: Operations and Administration
- Accessing the Monitor Program
- Menus and Parameters
- Main Menu
- Info Screens Menu
- Unit Control Menu
- Basic Configuration Menu
- Site Survey Menu
- Advanced Configuration Menu
- IP Parameters (AU, SU and GU)
- Air Interface Parameters (AU and SU)
- Network Management Parameters (AU, SU and GU)
- Bridge Parameters (AU, SU and GU)
- Performance Parameters (AU and SU)
- Service Parameters (AU and SU)
- Security Parameters (AU and SU)
- Voice Parameters (Subscriber Units with Voice Support Only)
- Dialing Parameters (Subscriber Units with Voice Support Only)
- Telephony Signals (Subscriber Units with Voice Support Only)
- Hopping Parameters (GU)
- Alarm Parameters (GU)
- Configuration Download/Upload
- System Manual: Appendices
2-48
BreezeACCESS 4.0 Operations and Administration
Manual Revision: 1.01
Table 2-12: VLAN Data Port Functionality Summary – Trunk Link
#
Hybrid Link – Transfers both tagged and untagged
frames, since the devices connected to it can be either
VLAN-aware or VLAN-unaware. This is equivalent to
defining no VLAN support, as the unit is transparent to
VLAN.
The following table summarizes the functionality of the
data port for an Hybrid link:
Table 2-13: VLAN Data Port Functionality Summary– Hybrid Link
"
Voice Priority Tag Option (SU with voice support only) –.
Supports priority for voice frames (RTP packets) in units with
VLAN ID – Management & Voice of 65535 (No VLAN). If
enabled, a Priority Tag that includes the value of the VLAN
Priority – Voice parameter and a zero value in the VID field
will be inserted into all voice frames (RTP packets) generated
by the unit before transmission to the Wireless or Ethernet
port.
Valid selections are: Enable and Disable.
Default selection is Disable.
" VLAN Forwarding (AU and SU)– Applicable for trunk link
only. Defines the VLAN ID values that will be included in the
VLAN Forwarding List. If the VLAN Link Type is defined as a
Action Data Port
(SU and AU)
Accept from Ethernet Tagged frames.
If Forwarding is enabled, only frames with VLAN ID values
which are included in the Forwarding list are forwarded.
Accept from Wireless Tagged frames.
If Forwarding is enabled, only frames with VLAN ID values
which are included in the Forwarding list are forwarded.
Tag Insert No
Tag Remove No
Action Data Port
(SU and AU)
Accept from Ethernet All
Accept from Wireless All
Tag Insert No
Tag Remove No